By A Mystery Man Writer
LINX-8 G8 Barrel Lifting Hook to EN 1677-1. For horizontal lifting of steel drums. Use in pairs. Manufactured from alloy steel. Proof load tested to 2.5 x WLL. Fatigue tested to 1.5 x WLL for 20,000 cycles. 100% Magnaflux crack detected. Operating temp range from -40°C to 380°C (up to 200°C without reduction).
LINX-8 G8 Eye Foundry Hook to EN 1677-1. For Grade 8 chain slings and wire ropes. Manufactured from alloy steel. Proof load tested to 2.5 x WLL.
LINX-8 Grade 8 Eye Foundry Hook (BFH) EN1677-1
Yoke Grade 8 Swivel Sling Hook with Ball Bearing BS EN1677-1+2
LINX-8 G8 Clevis Reeving Link to EN 1677-4. Manufactured from alloy steel. Proof load tested to 2.5 x WLL. Fatigue tested to 1.5 x WLL for 20,000
LINX-8 Grade 8 Clevis Reeving Link (ARL) EN1677-1
LINX-8 Grade 8 (G8) Components – pewag UK Limited
LINX-8 G8 Eye Grab Hook to EN 1677-1. Chain shortening hook for Grade 8 chain slings. Manufactured from alloy steel. Proof load tested to 2.5 x WLL.
LINX-8 Grade 8 Eye Grab Hook With Safety Pin (BGHS) EN1677-1
LINX-8 G8 Eye Safety Locking Swivel Hook to EN 1677-1 + 3. Safety swivel hook with plain bush. Manufactured from alloy steel. Proof load tested to 2.5
LINX-8 Grade 8 Eye Safety Locking Swivel Hook (SVH) EN1677-1 + 3
LINX-8 LWR weld-on lifting and lashing points. Commonly used on vehicle bodies and for the lifting and moving of machines. An integral spring holds
LINX-8 LWR Weld-On Lifting and Lashing Point
Grade 8 Clevis Sling Hook BS EN1677-1+2
LINX-8 G8 Component Connector to EN 1677-1. For connection of Grade 8 chains and fittings. Manufactured from alloy steel. Proof load tested to 2.5 x
LINX-8 Grade 8 Connecting Link (JL) EN1677-1
LINX-8 G8 Eye Foundry Hook to EN 1677-1. For Grade 8 chain slings and wire ropes. Manufactured from alloy steel. Proof load tested to 2.5 x WLL.
LINX-8 Grade 8 Eye Foundry Hook (BFH) EN1677-1
LINX-8 LWR Weld-On Lifting and Lashing Point – pewag UK Limited
LINX-8 Lifting & Lashing Points – pewag UK Limited
LINX-8 LSP lifting and lashing points incorporate ball bearings which allow the units to rotate 360° whilst under load. The welded top link is
LINX-8 LSP Screw-In Lifting and Lashing Point