FUEL LINE HOSE CLAMP KITS – Taco Moto Co.

By A Mystery Man Writer

Two types offered: FUEL LINE HOSE CLAMPS These are the same Oetiker OEM clamps used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with electrical side cutters or Oetiker clamp tool. One time use. FUEL LINE HOSE CLAMPS SCREW TYPE These are for us

Two types offered:

FUEL LINE HOSE CLAMPS

These are the same Oetiker OEM clamps used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with electrical side cutters or Oetiker clamp tool. One time use.

FUEL LINE HOSE CLAMPS SCREW TYPE

These are for used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with a flat blade or Philips screwdriver.

  • Stainless steel hose clamps
  • Sold in a pack of 2

 

 


Two types offered: FUEL LINE HOSE CLAMPS These are the same Oetiker OEM clamps used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with electrical side cutters or Oetiker clamp tool. One time use. FUEL LINE HOSE CLAMPS SCREW TYPE These are for used on all the rubber fuel lines of the bike from the injector to the fuel tap on the bottom of the tank. Remove and install with a flat blade or Philips screwdriver. Stainless steel hose clamps Sold in a pack of 2    

Fitting an aftermarket tank often means struggling to get the stock hoses routed without kinks or awkward positioning. , Solve that headache with the

SIDEWINDER FUEL LINE by TACO MOTO CO.

10x EFI Fuel Hose Clamp for Submersible Fuel Pumps- 12-14mm – Boost Monkey

Two types offered:, IN TANK FUEL FILTER CLAMPS OEM CRIMP TYPE, These are the same Oetiker OEM clamps used on the 'accordion' hose on the in-tank fuel

IN-TANK HOSE CLAMP KITS

HOLATO Gas Fuel Line Hose Clamps Fuel Filters with Inline Shut Off Valve Petcock Set for 50cc 70cc 90cc 110cc 125cc 150cc Taotao Coolster Apollo Baja Chinese ATV Four Wheeler Moped

2020 KTM/Husqvarna TPI Fuel Tank Connector Issue

KTM 500 EXC Build – rtwPaul

Fitting an aftermarket tank often means struggling to get the stock hoses routed without kinks or awkward positioning. , Solve that headache with the

SIDEWINDER FUEL LINE by TACO MOTO CO.

Garage Build - January 2023 - Racer X Magazine

FUEL TANK VENT HOSE W/ CHECK VALVE by TACO MOTO CO. – Taco Moto Co.

©2016-2024, travellemur.com, Inc. or its affiliates