By A Mystery Man Writer
Metal detecting find. Body is made of brass or bronze metal, has screws holding small wire or rod (wire is .054” thick or roughly 16 gauge). Object appears incomplete and missing much
Unknown tool identification - Anyone know what these are? : r/watchmaking
Three pieces of plastic connected by metal rod. Middle part slides up and down freely except for resistance when it it's the spring. Threaded rod in one blue piece. Plastic feels like
Made of wood and aluminum. Both parts are hollow. The egg shaped part is screwed on and has an o-ring seal, spins smoothly on a bearing. Smaller end has a sliding clip
Unknown tool identification - Anyone know what these are? : r/watchmaking
Three pieces of plastic connected by metal rod. Middle part slides up and down freely except for resistance when it it's the spring. Threaded rod in one blue piece. Plastic feels like hdpe. : r/whatisthisthing
metal object with rubber spring retractable end : r/whatisthisthing
Center post is a screw that moves up and down and pushes a flat plate down. Center plate is removable and not physically connected to screw. No markings. Cast metal. : r/whatisthisthing
What is this black metal part marked Cannondale on it? It is sealed in a clear bag with two 1.5 screws. The black metal part is approx. 6 x 2 x 1/3and
Unknown tool identification - Anyone know what these are? : r/watchmaking
Made of wood and aluminum. Both parts are hollow. The egg shaped part is screwed on and has an o-ring seal, spins smoothly on a bearing. Smaller end has a sliding clip
What are these? Socket like parts are brass and two brass rings of different sizes, wrench looking part is steel. But the brass sockets don't seem to fit the wrench part.
Made of brass, measures about 6 x 4 and the nipples are threaded inside : r/whatisthisthing